Once it is inserted properly, push it down gently, until the two arms snap into place, locking the card. I did not have a card in it previously so logicaly it should be easy to open the 2 arms to the side. The keyboard is held in place by two small screws under the panel. Place the panel a little bit too far to the right and slide it back into place. I used an Atheros Cardbus card for a while, using the madwifi driver, but the laptop has only one PCMCIA slot, and it was a bit of a pain to have it always occupied. On the photo to the right the screwdriver is inserted in the currect position. Once it is liberated from the two arms, the card can easily be removed completely.
|Date Added:||3 August 2015|
|File Size:||41.76 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
First the panel with the power button and other buttons has to be removed. Press these arms outwards with your thumbs, and lift the card with your index fingers. Thanks for the article.
The keyboard is held in place by m4200 small screws under the panel. The right end of the panel can then be raised slightly, and the panel can be pushed slightly to the right, and then raised. Use your nails or some small implement. I used my swiss army knife. It is done by inserting a small screwdriver under the panel at the upper right corner of the keyboard, above the delete key.
ASUS MN Memory & RAM Chip Upgrades – Lifetime Guarantee!
I used an Atheros Cardbus card for a while, using the madwifi driver, but the laptop has only one PCMCIA slot, and it was a bit of a pain to have it always occupied. Removing the keyboard Slide the keyboard slowly towards the display, applying moderate pressure.
It was ok initially, but when I upgraded the rest of my gear to Place the panel aasus little bit too far to the right and slide it back into place. Accept Reject Read More. October 27, Comments excellent thanks.
Installing a new wireless mini-pci card in an Asus M2400N laptop
Insert the new card Insert the card into the connectors, raising it a bit in the back. The socket is below the keyboard, more or less in the middle. We’ll assume you’re ok with this, but you can opt-out if you wish.
A useful guide, it helped me to install an Intel wireless card into an Iwill ii laptop. It has to move less than 1cm, just enough to release a series of tabs at the front end of the keyboard.
The short story is that it can be done upgrading m200 builtin wireless card in the laptop, and it works. The keyboard can now be lifted up and turned upside down towards yourself.
ASUS MN – описание, характеристики, тест, отзывы, цены, фото
The long story, with photos of each step, is in the extended copy below. You have the connectors in the front, the two arms that hold the card in place, and the black wire antenna. I assume the wire is for the antenna.
Use some object to keep it upright, in the middle. Beware of the band cable connecting the keyboard to the motherboard.
ASUS M2400N Memory Upgrades from Data Memory Systems
Be careful, as there are wires below connected to the buttons. Once it is inserted properly, push it down gently, until the two arms snap into place, locking the card. On the sides of the slot are two arms, ending in a semi-circular knob.
Your new card should show up in the list.