|Date Added:||27 December 2005|
|File Size:||14.69 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Do not use hubs, switches, etc.
WeetHet is being updated! To speedtouchh this there is a router setting usually called something like “Maximum Idle Time” which will cause the internet DSL connection to be dropped after a period of no internet use. Common problems are explained hereplease send me any new problems and or solutions so I can keep that page up-to-date.
SpeedTouch 516 and 585 on ADSL2+
Enter the digit number you just wrote down and press enter. Linux and Macintosh have similar settings: This usually acceptable, but pointless, although it often causes grief for members. Change the last digit to a “6” without the quotes.
NCF recommends making wifi changes on your modem from a computer that is connected via an ethernet cable to one of the LAN ports behind the SpeedTouch. Send them a mail and your modem will be repared pretty cheap Some routers may have an “always connected” setting which will override all speedtluch the foregoing and leave your DSL connection in permanent connect mode, which is the ideal solution!
You have then completed the full-reset.
Now click the blue ” Phone Book ” button and once more remove all entries. You now get the [td] -prompt – Type ” prompt “‘. It is very well possible that you cannot connect. Updating firmware is NOT without riscs and can render you modem useless! Connect the modem to power and reset it to the original factory configuration by holding the reset button for 15 speertouch. This is actually the easiest part, but requires you to be more precise and most of all careful!
Now – still in the ” PPP ” window – you should now activate the connection by setting ” Status ” to ” On “, as shown below:.
If it does not go to ” Up “, I’d suggest you check the settings particularly username and password. If you do now use a MXStream account in the Netherlands, then you might need slightly different settings!
SpeedTouch and on ADSL2+ – Support
This speetouch to be an issue with Belgian providers. This is done pretty straight forward. Configure your modem for auto dial-in. If you are not experienced with tricks like these: Copy the line without the quotes saying ‘SpeedTouch D ‘ the red text in the example above and open this webpage at SDSC: The process for older model SpeedTouch modems is similar.
Available for download now, the firmware Gsv7aa3.
Make sure you are no longer connected to the Internet! Retrieved from ” https: Views Read View source View history.
Change the number to something larger than 3 days eg. Click the blue ” Apply ” button in the left-top corner and click the blue ” Save All ” button on the lower left. Enter these setting for KPN:.
We just want to bring it just a bit further